Tool Kit With Accessories & Bag

Description

Preparing the surface of old wood just got a lot easier with the Restorer. Boasting many of the benefits of both a belt sander and an angle grinder this unique tool takes removing material from the surface of wood, metal, concrete and more to a new level. The flat roller of the Restorer yields a smoother finish on wood as the abrasive can be aligned with the grain of the sanding surface. The tool is well-balanced, with a pistol grip for one-handed use, and a front palm grip for working vertically or overhead. During use, the work surface stays cool and debris is pushed away from the surface toward the dust port, which can be hooked to most shop vacs or dust extractors. Changing the sanding sleeve is simple and tool-free. This will be your first tool pick for your next project, whether you are tackling a rough pallet or a slab. Additional accessory sanding sleeves and wheel attachments are sold separately.
Features:
Designed to remove paint and finish from wood, brick, and fiberglass
Works on nearly any type of surface, flat or curved, wet or dry
Easy accessory changes with the quick-release end cover
Remove rust and polish metal
Ergonomically balanced and lightweight
Trigger lock to save your grip during long sanding sessions
Powerful 3.5 amp variable-speed motor
Specifications:
UL, CSA and ETL Safety Listed
Speed: 1,000-3,200 feet per minute (variable)
Motor Type: Brushed
Amps: 3.5
Voltage: 120
Dust Port: 1-1/4" ID
Cord Length: 8′
Overall Size: 6.25" H x 6.59" W x 12.72" L
Tool Weight: 4.5 lb
Model: WR351K2
What’s Included:
The Restorer Tool Kit with Accessories and bag includes:
(6) Sanding Sleeves (2 each in 120 grit, 80 grit and 60 grit)
(1) Medium Abrasive Roller Sleeve
(1) Coarse Abrasive Roller Sleeve
(1) Rust and Paint Remover Wheel
(1) Tool Bag
Product Notes:
To change the sanding sleeve: Unlatch the two hooks from the side of the roller cover, and slide off the drum with sleeve attached. Squeeze slightly and slide sleeve off the roller drum. To replace, squeeze the roller drum slightly, and slide the new sleeve onto it. The roller drum is imprinted with “this side up” to ensure it is installed with the correct orientation. Replace the cover and latch again.
If you’re using one of the optional accessory wheels (sold separately), remove the drum roll and load the accessory wheel so “this side up” is visible. Then close and latch again.